Nominal & Technical Data
- Home
- Nominal & Technical Data
Nominal & Technical Data
Stainless Steel Chemical Properties
| Grade | C (Max) | Mn (Max) | P (Max) | S (Max) | Si (Max) | Cr | Ni | Mo | Nitrogen (Max) | Cu/ Others |
|---|---|---|---|---|---|---|---|---|---|---|
| 201 | 0.15 | 5.50/7.50 | 0.06 | 0.030 | 1.0 | 16.0/18.0 | 3.5/5.5 | - | - | n-25 max |
| 202 | 0.15 | 7.50/10.0 | 0.06 | 0.030. | 1.0 | 17.0/19.0 | 4.0/6.0 | - | - | n-25 max |
| JS- 203 | 0.08 | 9.2510.25 | 0.070 | 0.030 | 0.75 | 14.25 - 15.25 | 2.25 - 2.75 | - | - | 1.60- 2.0 |
| 301 | 0.15 | 2.00 | 0.045 | 0.030 | 1.00 | 16.00 - 18.00 | 6.00 - 8.00 | - | 0.10 | - |
| 301M | 0.10 | 4.55.5 | 0.060 | 0.030 | 0.75 | 14.50 - 15.50 | 6.0 - 7.0 | - | - | 1.70- 1.90 |
| 304 | 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 18.00 - 20.00 | 8.00- 10.50 | - | 0.10 | - |
| 304L | 0.030 | 2.00 | 0.045 | 0.030 | 0.75 | 18.00 - 20.00 | 8.00- 12.00 | - | 0.10 | - |
| 309s | 0.08 | 2.0 | 0.045 | 0.030 | 1.0 | 22.0/24.0 | 12.0/15.0 | |||
| 310 | 0.25 | 2.0 | 0.045 | 0.030 | 1.50 | 24.0/26.0 | 19.0/22.0 | |||
| 310S | 0.08 | 2.00 | 0.045 | 0.030 | 1.50 | 24.00- 26.00 | 19.00 - 22.00 | - | - | - |
| 316 | 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 16.00 - 18.00 | 10.00 - 14.00 | 2.00 - 3.00 | 0.10 | - |
| 316L | 0.030 | 2.00 | 0.045 | 0.030 | 0.75 | 16.00 - 18.00 | 10.00 - 14.00 | 2.00 - 3.00 | 0.10 | - |
| 317 | 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 18.00 - 20.00 | 11.00 - 14.00 | 3.00 - 4.00 | 0.10 | - |
| 317L | 0.030 | 2.00 | 0.045 | 0.030 | 0.75 | 18.00 - 20.00 | 11.00 - 15.00 | 3.00 - 4.00 | 0.10 | - |
| 321 | 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 17.00 - 19.00 | 9.00 - 12.00 | - | 0.10 | Ti5 ( C + N ) Min or 0.70 max |
| 347 | 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 17.00 - 19.00 | 9.00 - 13.00 | - | - | Cb= 10x ( C Min ) or 1.00 Max |
| 409 | 0.08 | 1.00 | 0.040 | 0.010 | 1.00 | 10.50 - 11.75 | 0.50 | - | - | Ti= 6x (C+ N ) Min or 0.70 Max |
| 409M | 0.03 | 0.81.2 | 0.030 | 0.030 | 0.40.75 | 11.00- 12.00 | 1.5 max. | - | - | Ti= 6x (C) Min or 0.70 Max |
| 410S | 0.08 | 1.00 | 0.040 | 0.030 | 1.00 | 11.50- 13.50 | 0.60 | - | - | - |
| 410 | 0.15 | 1.00 | 0.040 | 0.030 | 1.00 | 11.50- 13.50 | 0.75 | - | - | - |
| 420 | 0.35 | 0.50 | 0.035 | 0.015 | 0.50 | 12.00 - 13.00 | 0.20.3 | - | - | - |
| 440A | 0.60/0.70 | 1.0 | 0.040 | 0.030 | 1.0 | 16.0/18.0 | - | - | - | - |
| 440B | 0.75,0.95 | 1.0 | 0.040 | 0.030 | 1.0 | 16.0/18.0 | - | - | - | - |
| 440C | 0.95, 1.2 | 1.0 | 0.040 | 0.030 | 1.0 | 16.0/18.0 | - | - | - | - |
| 430 | 0.12 | 1.00 | 0.040 | 0.030 | 1.00 | 16.00 - 18.00 | 0.75 | - | - | - |
| JSL AUS | 0.08 | 7.08.0 | 0.070 | 0.030 | 0.75 | 15.50 - 16.50 | 4.25 - 4.75 | - | - | 0.9 - 1.10 |
| 904L | 0.02 | 2.00 | 0.030 | 0.045 | 1.00 | 19.0-23.0 | 23.0-28.0 | - | - | 23.0-28.0 |
| 2205 | 0.03 | 2.00 | 0.030 | 0.020 | 1.00 | 21.0-23.0 | 4.5-6.5 | 4.5-6.5 | ||
| 2207 | 0.030 | 1.20 | 0.035 | 0.020 | 0.30 | 24.0-26.0 | 6.0-8.0 | - | - | 6.0-8.0 |
| * Thickness of 1.27mm & below will have elongation of 20% min. | ||||||||||
Stainless Steel Mechanical Properties
| MECHANICAL PROPERTIES | |||||
|---|---|---|---|---|---|
| Grade | Tensile | Yield | %Age | Hardness (Max) | - |
| - | Strength Mpa, (Min) | Strength | Elongation | - | - |
| - | - | Mpa, (Min) | in 50mm | - | - |
| - | - | - | gauge length min | BHN | Rb |
| 301 | 515 | 205 | 40 | 217 | 95 |
| 304 | 515 | 205 | 40 | 201 | 92 |
| 304L | 485 | 170 | 40 | 201 | 92 |
| 310S | 515 | 205 | 40 | 217 | 95 |
| 316 | 515 | 205 | 40 | 217 | 95 |
| 316L | 485 | 170 | 40 | 217 | 95 |
| 317 | 515 | 205 | 35 | 217 | 95 |
| 317L | 515 | 205 | 40 | 217 | 95 |
| 321 | 515 | 205 | 40 | 217 | 95 |
| 347 | 515 | 205 | 40 | 201 | 92 |
| 409 | 380 | 170 | 20 | 179 | 88 |
| 409M | 430 | 275 | 20 | 187 | 90 |
| 410S | 415 | 205 | 22 | 183 | 89 |
| 410 | 450 | 205 | 20 | 217 | 89 |
| 420 | 700( max ) | - | 15 | 217 | 95 |
| 430 | 450 | 205 | 22 | 183 | 89 |
| JSL AUS | 515 | 205 | 40 | 217 | 95 |
| JS- 203 | 515 | 205 | 40 | 217 | 95 |
| 301M | 515 | 205 | 40 | 217 | 95 |
Nickel Alloy Chemical Properties
| U.S.A. / GROSSBRITAINNIE- U.S.A. / GRANDE-BRETAGNE-- U.S.A. / GREAT BRITAIN | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Handelsbezeichung | C% | Co% | Cr% | Mo% | Ni% | V% | W% | Ai% | Cu% | Nb/Cb Ta% | Ti% | Fe% | Sonstige Autres-Other% |
| Designation Comercial | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Comercial designation | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Monel 400 | 0.12 | - | - | - | 65 | - | - | - | 32 | - | - | 1.5 | Mn 1.0 |
| Monel 401 | 0.1 | - | - | - | 43 | - | - | - | 53 | - | - | 0.75 | Si 0.25; Mn 2.25 |
| Monel 404 | 0.15 | - | - | - | 52.0-57.0 | - | - | 0.05 | rest/bal | - | - | 0.5 | Mn 0.10; Si 0.10;S o.024 |
| Monel 502 | 0.1 | - | - | - | 63.0-17.0 | - | - | 2.5-3.5 | rest/bal | - | 0.5 | 2 | Mn 1.5;Si 0.5; S 0.010 |
| Monel K 500 | 0.13 | - | - | - | 64 | - | - | 2.8 | 30 | - | 0.6 | 1 | Mn 0.8 |
| Monel R 405 | 0.15 | - | - | - | 66 | - | - | - | 31 | - | - | 1.2 | Mn 1.0; S 0.04 |
| Hastelloy B | 0.1 | 1.25 | 0.6 | 28 | rest/bal | 0.3 | - | - | - | - | - | 5.5 | Mn 0.80; Si 0.70 |
| Hastelloy B2 | 0.02 | 1 | 1 | 26.0-30.0 | rest/bal | - | - | - | - | - | - | 2 | Mn 1.0: Si 0.10 |
| Hastelloy C | 0.07 | 1.25 | 16 | 17 | rest/bal | 0.3 | 40 | - | - | - | - | 5.75 | Mn 1.0 :Si 0 0.70 |
| Hastelloy C4 | 0.015 | 2 | 14.0-18.0 | 14.0-17.0 | rest/bal | - | - | - | - | - | 0..70 | 3 | Mn 1.0 ; Si 0.08 |
| Hastelloy- C 276 | 0.02 | 2.5 | 14.0-16.5 | 15.0-17.0 | rest/bal | 0.35 | 3.0-4.5 | - | - | - | - | 4.0-7.0 | Mn 1.0;Si 0.05 |
| Hastelloy F | 0.02 | 1.25 | 22 | 6.5 | rest/bal | - | 0.5 | - | - | Nb2.10 | - | 21 | Mn 1.50;Si 0.50 |
| Hastelloy G | 0.05 | 2.5 | 21.0-23.5 | 5.5-7.5 | rest/bal | - | 1 | - | 1.5-2.5 | Nb1.75-2.5 | - | 18.0-21.0 | Mn 1.0-2.0;p0.04;Si 1.0;80.03 |
| Hastelloy G-2 | 0.03 | - | 23.0-26.0 | 5.0-7.0 | 47.0-52.0 | - | - | - | 0.70-1.20 | - | 0.70-1.50 | rest/bal | Mn 1.0;Si 1.0 |
| Hastelloy N | 0.06 | 0.25 | 7 | 16.5 | rest/bal | - | 0.2 | - | 0.1 | - | - | 3 | Mn 0.40;Si 0.25;B0.01 |
| Hastelloy S | 0.02 | 2 | 15.5 | 14.5 | rest/bal | 0.6 | 1 | 0.2 | - | - | - | 3 | Mn 0.50;Si 0.40;B0.0009;LA 0.02 |
| Hastelloy W | 0.06 | 1.25 | 5 | 24.5 | rest/bal | - | - | - | - | - | - | 5.5 | Mn 0.050 ; Si 0.50 |
| Hastelloy X | 0.1 | 1.5 | 22 | 9 | rest/bal | - | 0.6 | - | - | - | 18.5 | - | Mn 0.6; Si 0.60 |
| Incoloy 800 | 0.04 | - | 21 | - | 32 | - | - | 0.3 | - | - | 0.4 | 45 | - |
| Incoloy 800 H | 0.08 | - | 21 | - | 32 | - | - | 0.3 | - | - | 0.4 | 45 | - |
| Incoloy 801 | 0.05 | - | 20.5 | - | 32 | - | - | - | - | - | 1.1 | 45 | - |
| Incoloy 802 | 0.35 | - | 21 | - | 32 | - | - | 0.6 | - | - | 0.7 | 45 | - |
| Incoloy 804 | 0.05 | - | 29.5 | - | 41 | - | - | 0.3 | - | - | 0.6 | 25.4 | - |
| Incoloy 805 | 0.12 | - | 7.5 | 0.5 | 36 | - | - | - | 0.1 | - | - | rest/bal | Mn 0.60;Si 0.50 |
| Incoloy 810 | 0.25 | - | 21 | - | 32 | - | - | - | 0.5 | - | - | rest/bal | Mn 0.90; Si 0.80 |
| Incoloy 825 | 0.04 | - | 21 | 3 | 42 | - | - | - | 2 | - | 1 | 30 | - |
| Incoloy 825 Cp | 0.04 | - | 21.5 | 3 | 42 | - | - | - | 2.2 | Nb0.9 | - | 30 | - |
| Incoloy 840 | 0.08 | - | 20 | - | 20 | - | - | - | - | - | - | rest/bal | Mn 1.0;Si 1.0 |
| Incoloy 901 | 0.05 | - | 12.5 | 6 | rest/bal | - | - | 0.15 | - | - | 2.7 | 34 | Mn 0.24;Si 0.12;B0.015 |
| Incoloy 901 Mod | 0.05 | - | 12.5 | 5.8 | rest/bal | - | - | - | - | - | 2.9 | 34 | Mn 0.09;Si 0.08;B0.015 |
| Incoloy 903 | 0.02 | 15 | - | - | 38 | - | - | 0.7 | - | Nb 3.0 | 1.4 | 41 | - |
| Incoloy 904 | 0.02 | 14 | - | - | 33 | - | - | - | - | - | 1.7 | 50 | - |
| Incoloy DS | 0.06 | - | 18 | - | 37 | - | - | - | - | - | - | 42 | Mn 1.0; Si 2.3 |
| Incoloy Ma- 956 | - | - | 20 | - | - | - | - | 4.5 | - | - | 0.5 | 74.4 | Y2.03 0.5 |
| Incoloy 600 | 0.05 | - | 15.5 | - | 75 | - | - | - | - | - | - | 8 | - |
| Incoloy 601 | 0.05 | - | 23 | - | 60 | - | - | 1.4 | - | - | - | 14 | - |
| Incoloy 604 | 0.04 | - | 15.8 | - | rest/bal | - | - | - | 0.1 | Nb 2.0 | - | 7.2 | Mn 0.20; Si 0.20 |
| Incoloy 610 | 0.2 | - | 15.5 | - | rest/bal | - | - | - | 0.5 | Nb 1.0 | - | 9 | Mn 0.90;Si 2.0 |
| Incoloy 617 | 0.07 | 12.5 | 22.5 | 9 | 54 | - | - | 1 | - | - | - | - | - |
| Incoloy 625 | 0.05 | - | 21.5 | 9 | 61 | - | - | 0.4 | - | Nb 3.65 | 0.4 | 2.5 | Mn 0.50; Si 0.50 |
| Incoloy 671 | 0.05 | - | 48 | - | 51 | - | - | - | - | - | 0.35 | - | - |
| Incoloy 700 | 0.12 | 28.5 | 15 | 3.75 | 46 | - | - | 3 | 0.05 | - | 2.2 | 0.7 | Mn 0.10; Si 0.30 |
| Incoloy 702 | 0.04 | - | 15.6 | - | rest/bal | - | - | 3.4 | 0.1 | - | 0.7 | 0.35 | Mn 0.05: Si 0.20 |
| Incoloy 705 | 0.3 | - | 15.5 | - | rest/bal | - | - | - | 0.5 | - | - | 8 | Mn 0.90 ; Si 5.5 |
Carbon Steel Chemical Properties
| Specification | Grade | Chemical Composition [%] | Mechanical Properties | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | P | S | Si | Cr | Mo | Cu | Ni | V | Yield Strength | Tensile Strength | % Elongation (G.L. 50 mm WT 8 mm) e (min.) | ||||||||||
| Min. | Min. | |||||||||||||||||||||
| Min | Max. | Min | Max. | Max. | Max. | Min. | Max | Min. | Max | Min. | Max | Max | Max | Max | PSI | MPa | PSI | MPa | ||||
| HYDROCARBON PROCESS INDUSTRY/STRUCTURAL/PRESSURE VESSEL TUBES | ||||||||||||||||||||||
| ASTM | A | - | 0.25 | - | 0.95 | 0.05 | 0.045 | - | - | - | 0.4 | - | 0.15 | 0.40 for S | 0.4 | 0.08 | 30,000 | 205 | 48,000 | 330 | e=625000 A02/U09 | |
| A-53 | B | - | 0.3 | - | 1.2 | 0.05 | 0.045 | - | - | - | 0.4 | - | 0.15 | 0.40 for S | 0.4 | 0.08 | 35,000 | 240 | 60,000 | 415 | ||
| ASTM | A | - | 0.25 | 0.27 | 0.93 | 0.035 | 0.035 | 0.1 | - | - | 0.4 | - | 0.15 | 0.4 | 0.4 | 0.08 | 30,000 | 205 | 48,000 | 330 | 35L / 25T | |
| A-106 | B | - | 0.3 | 0.29 | 1.06 | 0.035 | 0.035 | 0.1 | - | - | 0.4 | - | 0.15 | 0.4 | - | 0.08 | 35,000 | 240 | 60,000 | 415 | 30L / 16.5T | |
| - | c | - | 0.35 | 0.29 | 1.06 | 0.035 | 0.035 | 0.1 | - | - | 0.4 | - | 0.15 | 0.4 | - | 0.08 | 40,000 | 275 | 70,000 | 485 | 30L / 16.5T | |
| ASTM | 1 | - | 0.3 | 0.4 | 1.06 | 0.025 | 0.025 | - | - | - | - | - | - | - | - | - | 30,000 | 205 | 55,000 | 380 | 35 | |
| A333 & A 334 | 6 | - | 0.3 | 0.29 | 1.06 | 0.025 | 0.025 | 0.1 | - | - | - | - | - | - | - | - | 35,000 | 240 | 60,000 | 415 | 30 | |
| SEAMLESS COLD DRAWN PRECISION STEEL TUBES FOR MECHANICAL APPLICATIONS/HYDRAULIC/PNEUMATIC POWER SYSTEMS | ||||||||||||||||||||||
| EN 10305-1/ | E 235 | - | 0.17 | - | 1.2 | 0.025 | 0.025 | - | 0.35 | - | - | - | - | - | - | 0.02 | - | 235 | - | 340 | 25 | |
| EN10305-4 | E 355 | 0.22 | 1.6 | 0.025 | 0.025 | 0.55 | 0.02 | 355 | 490 | 22 | ||||||||||||
| EN 10216-1 | P195 TR1 | - | 0.13 | - | 0.7 | 0.025 | 0.02 | - | 0.35 | - | 0.3 | - | 0.08 | 0.3 | 0.3 | - | - | 195 | - | 320 | 27 | |
| P235 TR1 | 0.16 | 1.2 | 0.025 | 0.02 | 0.35 | 0.3 | 0.08 | 0.3 | 0.3 | 235 | 360 | 25 | ||||||||||
| EN 10216-2 | P235 GH | - | 0.16 | - | 1.2 | 0.025 | 0.02 | - | 0.35 | - | 0.3 | - | 0.08 | 0.3 | 0.3 | 0.02 | - | - | - | - | - | |
| DIN 2391 | St - 45 | - | 0.17 | 0.4 | - | 0.025 | 0.025 | - | 0.35 | - | - | - | - | - | - | - | NBK : 215 / GBK : - | NBK : 340 / GBK : 315 | NBK : 470 | |||
| St - 45 | - | 0.21 | 0.4 | - | 0.025 | 0.025 | - | 0.35 | - | - | - | - | - | - | - | NBK : 255 / GBK : - | NBK : 440 / GBK : 390 | NBK : 570 | ||||
| St - 52 | - | 0.22 | - | 1.6 | 0.025 | 0.025 | - | 0.55 | - | - | - | - | - | - | - | NBK : 355 / GBK : - | NBK : 490 / GBK : 490 | NBK : 630 | ||||
| ASTM | SAE 1010 | 0.08 | 0.13 0.20 | 0.3 | 0.6 | 0.04 | 0.05 | - | - | - | - | - | - | - | - | - | As per Customer requirements | |||||
| A-519 | SAE 1018 | 0.15 | 0.28 | 0.6 | 0.9 | 0.04 | 0.05 | - | - | - | - | - | - | - | - | - | ||||||
| - | SAE 1026 | 0.22 | 0.38 | 0.6 | 0.9 | 0.04 | 0.05 | - | - | - | - | - | - | - | - | - | ||||||
| - | SAE 1035 | 0.32 | 0.44 | 0.6 | 0.9 | 0.04 | 0.05 | - | - | - | - | - | - | - | - | - | ||||||
| - | SAE 1040 | 0.37 | 0.21 | 0.6 | 0.9 | 0.04 | 0.05 | - | - | - | - | - | - | - | - | - | ||||||
| - | SAE 1518 | 0.15 | 0.44 | 1.1 | 1.4 | 0.04 | 0.05 | - | - | - | - | - | - | - | - | - | ||||||
| - | SAE 1541 | 0.36 | 0.33 | 1.35 | 1.65 | 0.04 | 0.05 | - | - | - | - | - | - | - | - | - | ||||||
| - | SAE 4130 | 0.28 | - | 0.4 | 0.6 | 0.04 | 0.04 | 0.15 | 0.35 | 0.8 | 1.1 | 0.15 | 0.25 | - | - | - | ||||||
| BOILER/HEAT EXCHANGER/SUPERHEATER & CONDENSER TUBES | ||||||||||||||||||||||
| ASTM A179 | - | 0.06 | 0.18 | 0.27 | 0.63 | 0.035 | 0.035 | - | - | - | - | - | - | - | - | - | 26,000 | 180 | 47,000 | 325 | 35 | |
| ASTM A192 | - | 0.06 | 0.18 | 0.27 | 0.63 | 0.035 | 0.035 | - | 0.25 | - | - | - | - | - | - | - | 26,000 | 180 | 47,000 | 325 | 35 | |
| ASTM | A-1 | - | 0.27 | - | 0.93 | 0.035 | 0.035 | 0.1 | - | - | - | - | - | - | - | - | 37,000 | 255 | 60,000 | 415 | 30 | |
| A 210 | C | - | 0.35 | 0.29 | 1.06 | 0.035 | 0.035 | 0.1 | - | - | - | - | - | - | - | - | 40,000 | 275 | 70,000 | 485 | 30 | |
| ASTM | T-11 | 0.05 | 0.15 | 0.3 | 0.6 | 0.025 | 0.025 | 0.5 | 1 | 1 | 1.5 | 0.44 | 0.65 | - | - | - | 30,000 | 205 | 60,000 | 415 | 30 | |
| A 213 | T-12 | 0.05 | 0.15 | 0.3 | 0.61 | 0.025 | 0.025 | - | 0.5 | 0.8 | 1.25 | 0.44 | 0.65 | - | - | - | 32,000 | 220 | 60,000 | 415 | 30 | |
| - | T-22 | 0.05 | 0.15 | 0.3 | 0.6 | 0.025 | 0.025 | - | 0.5 | 1.9 | 2.6 | 0.87 | 1.13 | - | - | - | 30,000 | 205 | 60,000 | 415 | 30 | |
| ASTM | P-11 | 0.05 | 0.15 | 0.3 | 0.6 | 0.025 | 0.025 | 0.5 | 1 | 1 | 1.5 | 0.44 | 0.65 | - | - | - | 30,000 | 205 | 60,000 | 415 | 30 | |
| A335 | P-12 | 0.05 | 0.15 | 0.3 | 0.61 | 0.025 | 0.025 | - | 0.5 | 0.8 | 1.25 | 0.44 | 0.65 | - | - | - | 32,000 | 220 | 60,000 | 415 | 30 | |
| - | P-22 | 0.05 | 0.15 | 0.3 | 0.6 | 0.025 | 0.025 | - | 0.5 | 1.9 | 2.6 | 0.87 | 1.13 | - | - | - | 30,000 | 205 | 60,000 | 415 | 30 | |
| BS 3059 Pt I | 320 | - | 0.16 | 0.3 | 0.7 | 0.04 | 0.04 | 0.1 | 0.35 | - | - | - | - | - | - | - | 28,000 | 195 | 46,000 | 320 | 69,500 | |
| BS 3059 Pt II | 622-490 | 0.08 | 0.15 | 0.4 | 0.7 | 0.03 | 0.03 | - | 0.5 | 2 | 2.5 | 0.9 | 1.2 | - | - | - | 40,000 | 275 | 71,000 | 490 | 93,000 | |
| DIN 1629 | St- 37.0 | - | 0.17 | - | - | 0.04 | 0.04 | - | - | - | - | - | - | - | - | - | WT 16mm = 235 / WT>16mm = 225 | 350 | - | |||
| St - 52 | - | 0.22 | - | - | 0.04 | 0.035 | - | - | - | - | - | - | - | - | - | WT 16mm = 355 / WT>16mm = 345 | - | Long 21 / Trans 19 | ||||
| DIN 17175 | St - 35.8 | - | 0.17 | 0.4 | 0.8 | 0.04 | 0.04 | 0.1 | 0.35 | - | - | - | - | - | - | - | WT 16mm = 235 / WT>16mm = 225 | 360 | 480 | |||
| St - 45.8 | - | 0.21 | 0.4 | 1.2 | 0.04 | 0.04 | 0.1 | 0.35 | - | - | - | - | - | - | - | WT 16mm = 255 / WT>16mm = 245 | 410 | 530 | ||||
| RAILWAYS | ||||||||||||||||||||||
| IS:1239 Pt I | - | - | - | - | - | 0.05 | 0.05 | - | - | - | - | - | - | - | - | - | - | - | 46,500 | 320 | - | |
| IS:1161 | YST-210 | - | 0.12 | - | 0.6 | 0.04 | 0.04 | - | - | - | - | - | - | - | - | - | 30,500 | 210 | 48,000 | 330 | - | |
| YST-240 | - | 0.16 | - | 1.2 | 0.04 | 0.04 | - | - | - | - | - | - | - | - | - | 35,000 | 240 | 59,500 | 410 | - | ||
| YST-310 | - | 0.25 | - | 1.3 | 0.04 | 0.04 | - | - | - | - | - | - | - | - | - | 45,000 | 310 | 64,500 | 445 | - | ||
| - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
